Enhanced TDS
Identification & Functionality
- Chemical Name
- Tilley Product Number
- Cleaning Ingredients Functions
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
Properties
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Typical Properties
Value Units Test Method / Conditions pH (as is) 5.1 - - Active Content (EW 242) 37.8 % - Color 1.0 Gardner - Residual Bleach Content 0.03 % - Isopropyl Alcohol Content 3.9 % - Sodium Sulfate Content 2 % - Pour Point 0.0 °C - Freezing Point -3 °C - Cloud Point (as is) 8 °C - Flash Point 77.0 °C - Density 1.104 g/ml - Viscosity (at 25°C) 17.0 cPs - Viscosity (at 60°C) 8 cPs - Critical Micelle Concentration 10304 mg/l - Regulated Volatile Organic Chemicals (Isopropanol) max. 5 % -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
Storage & Handling
- Storaging and Handling Information
- Handle BIO-TERGE PAS-8S with care; use away from sparks and open flame. Use in well ventilated area. Contact with eyes, nose or prolonged skin contact should be avoided. Wash thoroughly after handling material.
- It is recommended that BIO-TERGE PAS-8S be stored in sealed containers and kept in a cool, dry place. If material is frozen it should be heated gently and stirred to ensure it is homogeneous before use. BIO-TERGE PAS-8S that has been stored cold may develop a haze. This is normal and does not affect its performance.
- Bulk Storage Information: BIO-TERGE PAS-8S should be stored in vessels of 316 stainless steel or fiberglass with a corrosion liner. Material should be stored between 60 - 80°F (16°C - 27°C). An internal hairpin coil of stainless steel with low pressure steam (under 50 psig) should be used if heating is required. Mild agitation is required if the tank is heated. Material is heat sensitive and agitation prevents localized heating. Heating may not be required for inside storage if the tank is turned over frequently. Stainless steel 316 is preferred for pumps, pipes and transfer lines.