Enhanced TDS
Identification & Functionality
- Country of Origin
- Tilley Product Number
- Cleaning Ingredients Functions
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
- I&I Cleaning Applications
Properties
- Physical Form
- Appearance
- Clear liquid
- Typical Properties
Value Units Test Method / Conditions pH (10% aqueous) 8 - - Free Amine and Amine Hydrochloride Content max. 1.0 % - Color max. 200 - APHA Viscosity (at 25°C) 50 cPs - Pour Point -4.0 °C - Flash Point 54 °C PMCC Density 0.97 g/ml - Reactive Volatile Organic Compounds (Methanol) 6 % U.S. EPA - Composition
Value Units Test Method / Conditions Active Ingredients (n-Alkyl, 60% C14, 30% C16, 5% C12, 5% C18, Dimethyl Benzyl Ammonium Chloride Content) 25 % - Active Ingredients (n-Alkyl, 68% C12, 32% C14, Dimethyl Ethylbenzyl Ammonium Chloride Content) 25 % - Inert Ingredients 50 % - Total 100 % -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
Safety & Health
- Health Effects Information
BTC 2125M products are slightly toxic orally (LD50 maximum 500 mg/kg) and cause severe skin and extreme eye irritation.
Storage & Handling
- Storage Condition
- Handle liquid BTC products with care; use away from sparks and open flame. Use in well ventilated area.
- Avoid contact with eyes, nose or prolonged skin contact. Gloves, protective clothing, safety goggles and face shield should be worn when handling BTC products. Wash thoroughly after handling material.
- It is recommended that BTC products be stored in sealed containers and kept in a cool, dry place. If material is frozen, it should be heated gently and stirred to ensure it is homogeneous before use. Prilled products should be stored in a cool, dry place in their original shipping container. Keep lid closed to prevent agglomeration.
- Bulk Storage Information: BTC quaternaries can be stored in vessels of 316 stainless steel or fiberglass with a corrosion liner. Contact between quaternaries and anionic materials must be avoided. At use dilution, BTC quaternaries are non-corrosive to most plastics, natural rubber, stainless steel, monel metal, iron, brass, aluminum, lead and tin; however, BTC quaternaries as supplied, may be corrosive to the materials listed above.
- Liquid BTC products should be stored between 85 - 120°F. An internal hairpin coil of 316 stainless steel with low pressure steam under 50 psig) should be used if heating is required. Mild agitation is recommended while storing to maintain homogeneity.
- Pumps, pipes and transfer lines should be 316 stainless steel. Rubber hoses with Teflon cross-linked polyethylene with 316 S.S. fittings are recommended for loading and unloading.