Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
ADVANTAGE HYVOLT Il has very high dielectrio strength that exceeds most international requirements and excellent oxidation stability to reduce sludge and acid formation. its inherent low pour point gives ADVANTAGE HYVOLT Il excellent cooling properties and it can be readily mired with similar ASTM D-3487 oils.
Applications & Uses
- Markets
- Applications
- Application Area
- Product Application
ADVANTAGE HYVOLT Il is designed for use Type Il insulated oil electrical application requiring an ASTM D-3437.
Properties
- Typical Properties
Value Units Test Method / Conditions Viscosity (at 378°C) max. 66 SUS ASTM D 445 Viscosity (at 98.9°C) max. 36 SUS ASTM D 445 Viscosity (at 0°C) max. 76 cSt ASTM D 445 Viscosity (at 40°C) max. 12 cSt ASTM D 341 Viscosity (at 100°C) max. 3 cSt ASTM D 341 Specific Gravity (at 156°C) max. 0.91 - ASTM D 4052 Flash Point min. 145 °C Cleveland Open Cup, ASTM D92 Color max. 0.5 - ASTM D 6045 Pour Point max. -40 °C ASTM D 5949 Aniline Point 63 - 84 °C ASTM D 611 Interfacial Tension (at 25°C) min. 40 cm ASTM D 971 Dielectric Breakdown (at 60 Hz, Disk electrodes) min. 30 kV ASTM D 877 Dielectric Breakdown (at 60 Hz, VDE) 47 - ASTM D 1816 Power Factor (at 60 Hz, 25°C) 30 - 0.05 - ASTM D 924 Power Factor (at 60 Hz, 100°C) max. 0.30 % ASTM D 924 Gassing Tendency max. 30 min ASTM D 2300 Oxidation Stability (at 72 hour Sludge) max. 0.1 mass % ASTM D 2440 Total Acid Number max. 0.3 mg KOH/g - Sludge (at 164 hr) max. 0.2 mass % - Oxidation Stability min. 195 min ASTM D 2112, Rotating Bomb Test Oxidation Inhibitor Content 0.15 - 0.30 wt.% ASTM D 2668 Carrosive Sulfur Content Corrosive - ASTM D1275(8) Water Content max. 35 ppm ASTM D1533 Neutralization Number max. 0.03 mg KOH/g ASTM D 974 Polysycic Aromatic Compounds max. 3 wt.% IP346