Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
MOBIL 1 15W-50 is made with a proprietary blend of ultra high performance synthetic basestocks fortified with a precisely balanced component system. MOBIL 1 15W-50's heavier viscosity together with this high-performance component system helps to provide the ultimate in dynamic lubricant protection. This feature is supported, not only by meeting or exceeding the toughest industry performance standards, but also it is proven in gruelling racing applications. Key features and potential benefits include:
Features Advantages and Potential Benefits Advanced Full synthetic formula Helps prevent deposits and sludge build-up to enable long engine life Excellent overall lubrication and wear protection performance for many driving styles Outstanding thermal and oxidation stability Outstanding performance during the maximum oil change interval recommended in a vehicle's owners manual Extra anti -wear additive Extra protection for severe service
Applications & Uses
- Markets
- Applications
- Application Area
- Product Application
MOBIL 1 15W-50 is recommended for all types of vehicles, suitable for use in high-performance turbo-charged, supercharged gasoline and diesel multi-valve fuel injected engines found in passenger cars, light vans and trucks.
- MOBIL 1 15W-50 is suitable extreme engine stress conditions, where conventional oil often may not perform.
- MOBIL 1 15W-50 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Properties
- SAE Viscosity Grade
- Typical Properties
Value Units Test Method / Conditions Kinematic Viscosity (at 100°C) 18 mm²/s ASTM D445 Kinematic Viscosity (at 40°C) 125 mm²/s ASTM D445 Viscosity Index 160 - ASTM D2270 Ash Content (Sulfated) 1.21 wt.% ASTM D874 High Temperature High Shear Viscosity (at 150°C) 4.5 mPa.s ASTM D4683 Pour Point -39 °C ASTM D97 Flash Point 232 °C ASTM D92 Density (at 15.6°C) 0.87 g/cm³ ASTM D4052