Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
MOBIL 1 V-TWIN 20W-50 combines high performance synthetic basestocks technology with a precisely balanced component system to help provide excellent engine cleanliness, wear protection at high temperatures and protection from corrosion. Regular use of MOBIL 1 V-TWIN 20W-50 helps | maintain optimized power output due to the inherently strong performance and protection provided by the synthetic technology. This specially engineered motorcycle engine oil helps to deliver optimized performance under some of the most severe operating conditions.
Key features and potential benefits include:
Features Advantages and Potential Benefits Optimized frictional properties Consistent power due to reduced frictional losses. Overall optimized balance of engine performance Thermal and oxidation stability Excellent flow characteristics under extreme hot operating conditions helping to minimize deposit formation especially at the high operating temperatures found in air-cocled engines Low-temperature properties Excellent lubrication at cold operating conditions helping to enable easy starting, rapid wear protection and less drain on starter systems Excellent detergent/dispersant capability Help to provide engine cleanliness, smooth and reliable operation Effective protection from rust and corrosion Long life of critical valve train and bearing components
Applications & Uses
- Markets
- Applications
- Application Area
- Product Application
- MOBIL 1 V-TWIN 20W-50 is specifically recommended by ExconMobil for lubrication of four-stroke motorcycle engines in high performance motorcycles.
- Recommended by ExxonMobil for use in Harley-Davidson.
Properties
- SAE Viscosity Grade
- Typical Properties
Value Units Test Method / Conditions Cold - Cranking Simulator (Apparent Viscosity at -15°C) 7500 mPa.s ASTM D5293 Density (at 15.6°C) 0.87 g/cm³ ASTM D4052 Flash Point 214 °C ASTM D93 Kinematic Viscosity (at 100°C) 20.8 mm²/s ASTM D445 Kinematic Viscosity (at 40°C) 172 mm²/s ASTM D445 Apparent Viscosity (at -20°C) 14000 mPa.s ASTM D4684 Pour Point -42 °C ASTM D97 Viscosity Index 142 - ASTM D2270