Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Chemical Name
- INCI Name
- Tilley Product Number
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- Industrial Additives Functions
- Molecular formula
- CH₃(CH₂)₁₀CH₂-O-SO₃Na
- Technologies
- Product Families
Properties
- Physical Form
- Appearance
- Pale yellow liquid
- Typical Properties
Value Units Test Method / Conditions Actives Content (EW 302) 29 % - pH (10% aqueous) 8 - - Sodium Sulfate 0.78 % - Sodium Chloride 1.16 % - Unsulfated Material 1.09 % - Color (%T at 420 nm) 95 - - Freeze Point 4 °C - Viscosity (at 80°F) 25,000 - 65,000 cPs - Density 8.75 Ib./US gal - Flash Point min. 94 °C PMCC Pour Point 8.0 °C - Cloud Point 10.0 °C - RVOC 0.0 % U.S. EPA Ross Miles Foam (0.1% active initial) 16.5 cm - Ross Miles Foam (0.1% active. 5 minutes later) 16.3 cm -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- Health Effects Information
STEPANOL SLS PASTE is slightly toxic orally (LD50 is between 0.8 to 1.1 g/kg) and causes moderate skin and eye irritation at 10% active.
Packaging & Availability
- Packaging Information
STEPANOL SLS PASTE is available in bulk and 55-gallon drums.
Storage & Handling
- Storage Information
Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling STEPANOL SLS PASTE. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material. It is recommended that STEPANOL SLS PASTE be stored in sealed containers at temperatures above 60°F (16°C). Avoid overheating or freezing. If material is frozen, mild heat and agitation are recommended to ensure the material is homogeneous before use. Bulk Storage Information: Tanks made of 316 stainless steel or fiberglass with an Atlac 382 corrosion liner are recommended. Gear pumps and piping should be 316 stainless steel. Recommended storage temperature for bulk tanks is 90-125°F (32-52°C).