Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
Univis HVI oils provide outstanding viscosity control over a wide temperature range. Their excellent oxidation resistance allows extension of oil and filter change intervals while assuring clean systems. Their high level of anti-wear properties and excellent film strength characteristics result in exceptional equipment performance that not only results in fewer breakdowns but helps improve production capacity. Their controlled demulsibility permits the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water.
The Univis HVI oils provide the following benefits:
- Unusually high viscosity index and excellent viscosity control characteristics improve machine accuracy and reduce torque.
- Very low pour points maintain excellent fluidity conditions at low temperatures.
- Suitable for use in hydraulic equipment operating in very cold conditions, such as cold stores and mobile equipment operating in very cold climates.
- High performance and smooth hydraulic operations derived from uniform viscosity control, fast air release, very good foam control and good water separability.
- Exceptional rust and corrosion protection reduces the negative effects of moisture on system components.
- Effective oxidation stability reduces deposits and improves valve performance.
Applications & Uses
- Markets
- Applications
- Application Area
- Applications
- Hydraulic systems critical to uniform hydraulic oil viscosity over a wide temperature range
- Hydrostatic transmissions and dashpots
- They can also be used in fine instruments and other mechanisms where power input is limited and increases in torque due to the lubricant thickening cannot be tolerated
- To reduce deposit formation in equipment where close clearance servo-valves are used
- Systems where cold start-up and high operating temperatures are typical
- Systems requiring a high degree of load-carrying capability and anti-wear protection
- Applications where rust and corrosion protection are an asset such as systems where small amounts of water are unavoidable
Properties
- Specifications
Value Units Test Method / Conditions Copper Strip Corrosion Rating (at 100°C, 3 h) 1A - ASTM D130 Flash Point min. 100 °C DIN EN ISO 2592 Kinematic Viscosity (at 100°C) 5.3 - ASTM D445 Kinematic Viscosity (at -40°C) 13.5 - ASTM D445 Kinematic Viscosity (at -40°C) 371 - ASTM D445 Pour Point -60 °C ASTM D97 Viscosity Index 404 - ASTM D2270