Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Chemical Name
- INCI Name
- Tilley Product Number
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- Industrial Additives Functions
- Molecular formula
- CH₃(CH₂)₁₀CH₂OSO₃Na
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Properties
- Physical Form
- Appearance
- Clear to pale yellow liquid
- Typical Properties
Value Units Test Method / Conditions Actives Content (EW 302) 30 % - pH (10% aqueous) 11.3 - - Unsulfated Alcohol 0.3 % - Sodium Chloride 0.05 % - Sodium Sulfate 0.05 % - Excell NaOH 0.1 - - Color (Transmittance at 420 nm) 94 % - Viscosity (at 25°C) 200.0 cPs - Viscosity (at 60°C) 10 cPs - Pour Point 13.0 °C - Flash Point min. 94 °C PMCC Density 1.04 g/ml - Boiling Point min. 100 °C - Freeze Point 8 °C - RVOC 0.0 % U.S. EPA
Regulatory & Compliance
Safety & Health
- Health Effects Information
STEPANOL WA-EXTRA HP is slightly toxic orally in rats (LD50 is between 1,000 to 2,000 mg/kg bw) and may cause severe skin and eye irritation at 10% active.
Packaging & Availability
- Packaging Information
STEPANOL WA-EXTRA HP is available in bulk and 55 gallon drums (net weight 450 lb/204 kg).
Storage & Handling
- Storage Information
Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling STEPANOL WA-EXTRA HP. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material. It is recommended that STEPANOL WA-EXTRA HP be stored in sealed containers and kept at temperatures between 85 °F (29 °C) and 110 °F (43.3 °C). Avoid overheating or freezing. If material is frozen, mild heat and agitation are recommended to ensure the material is homogeneous before use.Bulk Storage Information: Material of construction: 304 stainless steel or 316 (or fiberglass with isophthalic resin, or HDPE). Gear pumps and piping should be 316 stainless steel. Recommended temperature for storage is 85-100 °F (29-43.3 °C). Optimum temperature would be between 85-90 °F. Max Temp is 120 °F (48.9 °C). Any hot water that is used to heat storage tanks, or trace heating elements should not exceed a temperature of 120 °F (48.9 °C).